Some aspects of the replacement of the main drive for generator - engine on thyristor converters - engine or inverters - induction motor on the condition of cold-rolled
DOI:
https://doi.org/10.31498/2225-6733.25.2012.29549Keywords:
4-cage mill, power quality, distortion factor sinusoidal voltage harmonicsAbstract
The paper considers the options for upgrading the drive cold-rolling mill and analyzed one aspect of the conversion - to change the parameters of quality of electricity supply. The values of voltage and current harmonics when using the generator - motor systems, thyristor converter – motor and induction motor
- frequency converter
References
Грудев А.П. Технология прокатного производства / А.П. Грудев, Л.Ф. Машкин, М.И. Ханин – М.: Металлургия, 1994. – 656с.
ГОСТ 13109- 97. Электрическая энергия. Требования к качеству электрической энергии в электрических сетях общего назначения. К., 1999. – 30с.
Жежеленко И.В. Качество электроэнергии на промышленных предприятиях / И.В. Жежеленко, Ю.Л. Саенко – М.: Энергоатомиздат, 2005. – 262с.
Башарин A.B. Управление электроприводами / А.В. Башарин, В.А.Новиков – Л. : Энергоиздат, 1982. – 392с.
Ключев В.И. Теория электропривода / В.И.Ключев – М.: Энергоатомиздат, 2001. – 704с.
Кочкин В.И. Управляемые статические устройства компенсации реактивной мощности для линий электропередачи / В.И. Кочкин // Электричество. – 2000. – №9. – С.13-19.
Тарасевич Ю.Ф. Литейно-прокатные агрегаты воздействуют на структуру производства и рынок тонколистовой стали / Ю.Ф. Тарасевич, С.П. Ефименко, В.С. Юсупов // Производство проката. – 2000. – № 5. – С. 33-42.
Чаплыгин Е.Е. Анализ искажений выходного напряжения и сетевого тока матричного преобразователя частоты. / Е.Е. Чаплыгин // Электричество. – 2000. – №11. – С. 25–38.
Downloads
How to Cite
Issue
Section
License
The journal «Reporter of the Priazovskyi State Technical University. Section: Technical sciences» is published under the CC BY license (Attribution License).
This license allows for the distribution, editing, modification, and use of the work as a basis for derivative works, even for commercial purposes, provided that proper attribution is given. It is the most flexible of all available licenses and is recommended for maximum dissemination and use of non-restricted materials.
Authors who publish in this journal agree to the following terms:
1. Authors retain the copyright of their work and grant the journal the right of first publication under the terms of the Creative Commons Attribution License (CC BY). This license allows others to freely distribute the published work, provided that proper attribution is given to the original authors and the first publication of the work in this journal is acknowledged.
2. Authors are allowed to enter into separate, additional agreements for non-exclusive distribution of the work in the same form as published in this journal (e.g., depositing it in an institutional repository or including it in a monograph), provided that a reference to the first publication in this journal is maintained.







