A study of environmentally friendly recycling of technogenic chromium and nickel containing waste by the method of solid phase extraction
DOI:
https://doi.org/10.15587/1729-4061.2018.121615Keywords:
waste processing, corrosion-resistant steel, carbon thermal reduction, phase analysis, microstructure, resource efficiencyAbstract
The study has revealed the regularities of the effect produced by increasing the content of scale of steel 12Cr18Ni10Ti in the charge from 5 to 75 mass % on the contents of the products of carbon thermal reduction of oxide waste of corrosion-resistant steels. The concentration of Ni is increased from 0.8 to 7.0 mass % when the Cr content ranges from 15.9 to 17.1 mass %. The concentration of Cr in the extraction products within the range of 16.1–17.1 mass% is provided with the content of scale of 95Cr18 steel in the charge in the range from 5 to 55 mass %. It has been found that metallization products mainly consist of a solid solution of alloying elements in α-Fe. Fe3O4, Fe3C, and Fe2C were also identified. The microstructure of the extraction products is spongy and disordered. The particles are sintered, with varying Cr and Ni contents in the ranges of 7.47 to 18.03 mass % and 2.97–10.40 mass %, respectively. The study has helped achieve environmentally safe conditions for solid-phase extraction of chrome and nickel containing industrial wastes from the production of corrosion-resistant steels with the return of the alloyed product to the welding industryReferences
- Puchol, R. Q., Sosa, E. R., González, L. O., Castañeda, Y. P., Sierra, L. Y. (2016). New conception of the reutilization of solid waste from Cuban nickeliferous hydrometallurgical industry. Centro Azucar, 43 (4), 1–15.
- Pincovschi, I., Neacsu, N., Modrogan, C. (2017). The Adsorbtion of Lead, Copper, Chrome and Nickel Ions from Waste Waters in Agricultural Argilaceous Soils. Revista de Chimie, 68 (4), 635–638.
- Madebwe, V., Madebwe, C., Munodawafa, A., Mugabe, F. (2017). Analysis of the Spatial and Temporal Variability of Toxic Heavy Metal Concentrations in Ground Water Resources in Upper Sanyati Catchment, Midlands Province, Zimbabwe. IIARD International Journal of Geography and Environmental Management, 3 (1), 23–37.
- Rubezhniak, I. H. (2016). Porivnialna otsinka normatyviv zabrudnennia gruntiv vazhkymy metalamy v Ukraini ta krainakh EU. Naukovyi visnyk Natsionalnoho universytetu bioresursiv i pryrodokorystuvannia Ukrainy. Seriya: Biolohiya, biotekhnolohiya, ekolohiya, 234, 228–238.
- Atanassov, I. (2008). New bulgarian soil pollution standards. Bulgarian Journal of Agricultural Science, 14, 68–75.
- Eastmond, D. A., MacGregor, J. T., Slesinski, R. S. (2008). Trivalent Chromium: Assessing the Genotoxic Risk of an Essential Trace Element and Widely Used Human and Animal Nutritional Supplement. Critical Reviews in Toxicology, 38 (3), 173–190. doi: 10.1080/10408440701845401
- Itankar, N., Patil, Y. (2014). Management of Hexavalent Chromium from Industrial Waste Using Low-cost Waste Biomass. Procedia – Social and Behavioral Sciences, 133, 219–224. doi: 10.1016/j.sbspro.2014.04.187
- Chervona, Y., Arita, A., Costa, M. (2012). Carcinogenic metals and the epigenome: understanding the effect of nickel, arsenic, and chromium. Metallomics, 4 (7), 619. doi: 10.1039/c2mt20033c
- Ryabchikov, I. V., Belov, B. F., Mizin, V. G. (2014). Reactions of metal oxides with carbon. Steel in Translation, 44 (5), 368–373. doi: 10.3103/s0967091214050118
- Mechachti, S., Benchiheub, O., Serrai, S., Shalabi, M. (2013). Preparation of iron Powders by Reduction of Rolling Mill Scale. International Journal of Scientific & Engineering Research, 4 (5), 1457–1472.
- Roshchin, V. E., Roshchin, A. V., Ahmetov, K. T., Povolotskiy, V. D., Goyhenberg, Yu. N. (2015). Formirovanie metallicheskoy i karbidnyh faz pri poluchenii uglerodistogo ferrohroma: teoriya i eksperiment. Problemy chernoy metallurgii i materialovedeniya, 1, 5–18.
- Kolesnikov, A. S., Nazarbekova, S. P., Baibolov, K. S., Dzholdasova, S. A. (2017). Thermodynamic simulation of chemical and phase transformations in the Fe2O3–NiO–CoO–C. Izvestiya Vuzov Tsvetnaya Metallurgiya (Proceedings of Higher Schools Nonferrous Metallurgy, 3, 37–44. doi: 10.17073/0021-3438-2017-3-37-44
- Kovalov, A. M., Petryshchev, A. S., Hryhorev, S. M. (2010). Analiz termodynamichnoi rivnovahy v systemi Ni–Co–O–C–H stosovno tekhnolohiyi metalizatsiyi metalooksydnykh tekhnohennykh vidkhodiv pretsyziinykh splaviv typu NK. Naukovi pratsi Donetskoho natsionalnoho tekhnichnoho universytetu. Seriya: Metalurhiya, 12, 7–15.
- Pan, J., Zheng, G., Zhu, D., Zhou, X. (2013). Utilization of nickel slag using selective reduction followed by magnetic separation. Transactions of Nonferrous Metals Society of China, 23 (11), 3421–3427. doi: 10.1016/s1003-6326(13)62883-6
- Simonov, V. K., Grishin, A. M. (2015). Termodinamicheskiy analiz i osobennosti kinetiki vosstanovleniya Cr2O3 uglerodom samostoyatel'no i v potoke SO, N2. Elektrometallurgiya, 9, 9–18.
- Akimov, E. V., Senin, A. V., Roshchin, V. E. (2013). Termodinamicheskiy analiz polucheniya nizkouglerodistogo ferrohroma s primeneniem modeli assotsiirovannyh rastvorov. Vestnik Yuzhno-Ural'skogo gosudarstvennogo universiteta. Seriya: Metallurgiya, 13 (1), 182–185.
- Simonov, V. K., Grishin, A. M. (2012). Termodinamicheskiy analiz i osobennosti mekhanizma tverdofaznogo vosstanovleniya Cr2O3 uglerodom. Ch. 1. Elektrometallurgiya, 9, 21–26.
- Simonov, V. K., Grishin, A. M. (2012). Termodinamicheskiy analiz i osobennosti mekhanizma tverdofaznogo vosstanovleniya Cr2O3 uglerodom. Ch. 2. Elektrometallurgiya, 10, 13–18.
- Zhao, L., Wang, L., Chen, D., Zhao, H., Liu, Y., Qi, T. (2015). Behaviors of vanadium and chromium in coal-based direct reduction of high-chromium vanadium-bearing titanomagnetite concentrates followed by magnetic separation. Transactions of Nonferrous Metals Society of China, 25 (4), 1325–1333. doi: 10.1016/s1003-6326(15)63731-1
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 Stanislav Hryhoriev, Artem Petryshchev, Ganna Shyshkanova, Tetyana Zaytseva, Oleksandr Frydman, Kristina Krupey, Andrey Andreev, Alexander Katschan, Yuliya Petrusha, Dmytro Stepanov
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.