Ways to improve operation reliability of traction electric motors of the rolling stock of electric transport

Authors

DOI:

https://doi.org/10.15587/1729-4061.2017.112109

Keywords:

electric transport, traction electric motor, diagnosis, operational reliability, probability of no-failure operation

Abstract

We found that the electrical equipment has a dynamics of failure rate growth according to the results of the processing of the statistical information of electric transport enterprises and analysis of the operating conditions of rolling stock systems and aggregates. We established that traction electric motor failures make up 20 % of all failures of electrical equipment. We analyzed the conditions of operation of traction electric motors and estimated the reliability.

The study of probabilistic and statistical characteristics of the functions of the distribution density of traction electric motors failure shows that some failures are approximated by an asymmetric distribution. In this regard, it is advisable to use a truncated normal distribution function N N{t; T; }, which will make possible tp increase the adequacy of models.

We established that the number of failures in the interval 0-t1 decreases significantly for large probability Q. We can consider the flow of failures in this interval as stationary for certain values.

We proposed a mathematical model for reliability evaluation (14), which, unlike existing models, is based on the system analysis of the probabilities of failure of subsystems, which are subjected to diagnosis (brush-holding unit, stator, anchor, collector), on a base of structural and functional diagrams of traction electric motor elements.

It makes possible to determine parameters of various elements of traction electric motors during operation. The model differs qualitatively from the existing ones by taking into account structural and electromagnetic characteristics and gibes possibility to optimize parameters of different units in relation to the requirements of the system of planned and preventive repair, when traction motors developed a given resource and continue to operate.

Thus, it is possible to estimate reliability parameters a traction electric motor of any type according to the results of the studies and the above calculations.

Author Biographies

Tatyana Pavlenko, O. M. Beketov National University of Urban Economy in Kharkiv Marshala Bazhanova str., 17, Kharkiv, Ukraine, 61002

Doctor of Technical Sciences, Professor

Department of electric transport

Vyacheslav Shavkun, O. M. Beketov National University of Urban Economy in Kharkiv Marshala Bazhanova str., 17, Kharkiv, Ukraine, 61002

PhD, Associate Professor

Department of electric transport

Aleksandr Petrenko, O. M. Beketov National University of Urban Economy in Kharkiv Marshala Bazhanova str., 17, Kharkiv, Ukraine, 61002

PhD, Associate Professor

Department of electric transport

References

  1. Yatsun, M. A., Yatsun, A. M. (2010). Operations and diagnostics of electric machines and apparatuses. Lviv: «Lvivska politekhnika», 228.
  2. Shavkun, V. M., Pevnaya, A. A., Uvarov, O. B. (2015). Investigation of the influence of operational factors on the loading parameters of power electrical equipment of trolleybuses. Simvol nauki, 11, 64–67.
  3. Daleka, V. Kh., Budnychenko, V. B., Karpushyn, E. I., Kovalenko, V. I. (2014). Technical Operation of Urban Electric Transport. Kharkiv: KhNUMH, 235.
  4. Shavkun, V. (2010). On the issue of increasing the reliability of traction electric motors and resource conservation on the rolling stock of urban electric transport. Komunalne hospodarstvo mist, 97, 272–278.
  5. Castaldi, P., Tilli, A. (2005). Parameter estimation of induction motor at standstill with magnetic flux monitoring. IEEE Transactions on Control Systems Technology, 13 (3), 386–400. doi: 10.1109/tcst.2004.841643
  6. Peresada, S., Montanari, M., Till, A., Bolotnikov, A. (2007). A speed-sensorless indirect field-oriented control for induction motor: theoreticfl result and experimental evaluation. Zbirnyk naukovykh prats Dniprodzerzhynskoho derzhavnoho tekhnichnoho universytetu (tekhnichni nauky). Problemy avtomatyzovanoho elektropryvoda. Teoriia i praktyka, 60–65.
  7. Douglas, H., Pillay, P., Ziarani, A. (2003). Detection of broken rotor bars in induction motors using wavelet analysis. IEEE International Electric Machines and Drives Conference, 2003. IEMDC’03. doi: 10.1109/iemdc.2003.1210345
  8. Stephan, J., Bodson, M., Chiasson, J. (1994). Real-time estimation of the parameters and fluxes of induction motors. IEEE Transactions on Industry Applications, 30 (3), 746–759. doi: 10.1109/28.293725
  9. Lukianov, S., Karandaev, A., Sarvarov, A. et. al. (2014). Development and implementation of intelektualni systems of diagnosing the technical condition elektrooborudovaniya. Bulletin of Magnitogorsk state technical University. Named after G. I. Nosova, 1 (45), 129–134.
  10. Mehala, N., Dahiya, R. (2007). Motor current signature analysis and its applications in induction motor fault diagnosis. International journal of systems applications, engineering & development, 2 (1), 29–35.
  11. Sinchuk, O. M., Sushko, D. L. (2003). To the problem of construction of a complex, continuous system of diagnostics of traction electric vehicles of rolling stock. Bulletin of the East-Ukrainian National University named after. V. Dal, 9 (67), 25–28.
  12. Shavkun, V. (2014). Diagnostics of electric transport traction electric machines. Eastern-European Journal of Enterprise Technologies, 1 (7 (67)), 48–53. doi: 10.15587/1729-4061.2014.20196
  13. Shavkun, V. M., Shatskyi, S. P. (2011). Influence of periodicity of diagnostics on indicators of reliability of traction electric motors of rolling stock of electric transport. Мunicipal economy of cities, 101, 265–269.
  14. Calis, H., Unsworth, P. J. (1999). Fault diagnosis in induction motors by motor current signal analysis. In Proc. SDEMPED, 237–241.
  15. Hetman, G. (1998). Universal traction-energy characteristics of the electromotive force. Pridneprovsky scientific bulletin (technical sciences), 105 (172), 46–55.
  16. Daleka, V. Kh., Shavkun, V. M. (2013). Influence of parameters of technical condition of traction electric motors on safety of passenger transportation. Communal economy of cities, 104, 432–435.
  17. Marino, R., Peresada, S., Tomei, P. (2000). On-line stator and rotor resistance estimation for induction motors. IEEE Transactions on Control Systems Technology, 8 (3), 570–579. doi: 10.1109/87.845888
  18. Thomson, W. T., Fenger, M. (2001). Current signature analysis to detect induction motor faults. IEEE Industry Applications Magazine, 7 (4), 26–34. doi: 10.1109/2943.930988
  19. Shavkun, V. M., Bushma, V. M. (2011). Methods of monitoring the parameters of traction electric motors in the process of operation of rolling stock of urban electric transport. Communal economy of cities, 97, 272–278.
  20. Bondarenko, V. H., Kanivska, I. Yu., Paramonova, S. M. (2006). Teoriya imovirnostei i matematychna statystyka. Kharkiv: NTTU «KhPI», 125.

Downloads

Published

2017-10-30

How to Cite

Pavlenko, T., Shavkun, V., & Petrenko, A. (2017). Ways to improve operation reliability of traction electric motors of the rolling stock of electric transport. Eastern-European Journal of Enterprise Technologies, 5(8 (89), 22–30. https://doi.org/10.15587/1729-4061.2017.112109

Issue

Vol. 5 No. 8 (89) (2017): ENERGY-SAVING TECHNOLOGIES AND EQUIPMENT

Section

Energy-saving technologies and equipment

License

Copyright (c) 2017 Tatyana Pavlenko, Vyacheslav Shavkun, Aleksandr Petrenko

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.