Substantiation of choosing the design of a reactordust collector with two colliding flows
DOI:
https://doi.org/10.15587/1729-4061.2018.133324Keywords:
reactor model, purification efficiency, gas, dust flow, hydraulic resistanceAbstract
The objects of this study are the dust collectors for dry gas purification ‒ devices in which hydrodynamic modes are implemented. Advantages of using such devices are: work with gases of high temperature, high degree of purification; regulation of a process of gas purification from dust due to regulation of secondary air consumption. There are no improvements for the theory of operation of apparatuses for the dry purification of a gas flow from dust. It does not provide an opportunity for a reasonable choice of the design of an apparatus and its main characteristics. We consider a design of a dust collector for dry purification of a gas flow, in which a degree of purification of a gas flow from dust reaches 97‒98.5 %, regardless of the particle size of a dispersed phase. This fact is a necessary condition for modern industry. We proposed the design of a heterogeneous reactor for a gas-solid system with two colliding flows. We determined specific features of hydrodynamics of a reactor, distribution of stay time in a reactor, and proposed a model of a reactor based on discrete Markov processes. We established experimentally that a degree of purification of a gas-dispersed flow from dust in the proposed reactor can reach 98 %. This is possible because of formation of agglomerates due to intensive interaction between particles that are larger than the particle size at the reactor inlet 3‒4 times. We proved that, compared to a suspended layer and hydrodynamic conditions in cyclones and vortex chambers, the proposed reactor has an advantage in terms of energy consumption for overcoming of resistance. This is due to the fact that in these devices spend a large proportion of energy for maintenance of particles in a suspended state, and also for pumping air through internal devices. During operation of the proposed gas-purifying dust collector, we achieved qualitative indicators, which confirm the expediency of the conducted studies and the expediency of choosing a device for dry purification of a gas flow.
References
- Modrzycka, A., Winczek, J. (2016). Ekologia i ochrona środowiska w budownictwie. Edukacja – Technika – Informatyka, 18 (4), 177–182. doi: 10.15584/eti.2016.4.22
- Suranani, S., Kumar, S., Sridhar, S. (2016). New frontiers in chemical energy and environmental engineering. Environmental Science and Pollution Research, 23 (20), 20053–20054. doi: 10.1007/s11356-016-7565-5
- Campos, L. M. S., Trierweiller, A. C., De Carvalho, D. N., Šelih, J. (2016). Environmental management systems in the construction industry – a review. Environmental engineering and management journal, 16 (2), 453–460.
- Aslamova, V. S., Zhabey, A. A. (2010). Avtomatizirovannaya sistema issledovaniya ciklonov i skrubberov. Izvestiya Tomskogo politekhnicheskogo universiteta. Inzhiniring georesursov, 316 (4), 71–76.
- Pitak, I., Shaporev, V., Briankin, S., Pitak, O. (2017). Justification of the calculation methods of the main parameters of vortex chambers. Technology Audit and Production Reserves, 5 (3 (37)), 9–13. doi: 10.15587/2312-8372.2017.112782
- Mines, R. O. (2014). Environmental engineering: principles and practice. Wiley-Blackwell, 662.
- Pitak, I., Briankin, S., Pitak, O., Shaporev, V. (2017). Analysis of the sanitary purification of gas emissions from dust in the lime manufacture. EUREKA: Physics and Engineering, 5, 65–72. doi: 10.21303/2461-4262.2017.00435
- VShaporev, V., Pitak, I., Pitak, O., Briankin, S. (2017). Study of functioning of a vortex tube with a two-phase flow. Eastern-European Journal of Enterprise Technologies, 4 (10 (88)), 51–60. doi: 10.15587/1729-4061.2017.108424
- Baltuk, V. A., Melnikov, O. B., Mirus, O. V. (2011). Zalezhnist efektyvnosti pylovlovliuvannia vidtsentrovo-inertsiynykh aparativ vid konstruktsiyi bunkera. Promyslova hidravlika i pnevmatyka, 2 (32), 44–47.
- Singh, G., Saini, D., Chandra, L. (2016). On the evaluation of a cyclone separator for cleaning of open volumetric air receiver. Applied Thermal Engineering, 97, 48–58. doi: 10.1016/j.applthermaleng.2015.10.087
- Barsky, E. (Ed.) (2015). Entropic Invariants of Two-Phase Flows. Azrieli College of Engineering, Jerusalem, 266. doi: 10.1016/c2013-0-23121-4
- Tret'yakov, Yu. D., Slin'ko, M. G., Melihov, I. V. (2007). Materialy seminara po probleme «nelineynaya dinamika himicheskih reakciy, processov i reaktorov. Hronika». Teoreticheskie osnovy himicheskoy tekhnologii, 41 (2), 237–238.
- Zuykov, A. L. (2014). Gidravlicheskoe modelirovanie kontrvihrevyh techeniy. Vestnik MGSU, 6, 114–125.
- Volkov, K. N., Deryugin, Yu. N., Emel'yanov, V. N., Karpenko, A. G., Kozelkov, A. S., Teterina, I. V. (2014). Metody uskoreniya gazodinamicheskih raschetov na nestrukturirovannyh setkah. Moscow: FIZMATLIT, 536.
- Tsakiridis, P. E., Oustadakis, P., Moustakas, K., Agatzini, S. L. (2016). Cyclones and fabric filters dusts from secondary aluminium flue gases: a characterization and leaching study. International Journal of Environmental Science and Technology, 13 (7), 1793–1802. doi: 10.1007/s13762-016-1014-3
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 Inna Pitak, Valery Shaporev, Oleg Pitak, Nataliia Ponomarova
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
