Analysis of axisymmetric problem from the theory of elasticity for an isotropic cylinder of small thickness with alternating elasticity modules
DOI:
https://doi.org/10.15587/1729-4061.2019.162153Keywords:
radially non-homogeneous cylinder, asymptotic method, boundary layer, edge effect, variation principle, main vector, eigenvalue.Abstract
Asymptotic methods play an important role in solving three-dimensional elasticity problems. The method of asymptotic integration of three-dimensional equations of elasticity theory takes an important place in solving the problems of the limited transition from three-dimensional problems to two-dimensional for elastic membranes. Based on the method of asymptotic integration of equations of the elasticity theory, the axisymmetric problem of elasticity theory for radially non-homogeneous cylinder of small thickness is explored. The case when elasticity modules change by the radius according to the linear law is considered. It is expected that the lateral part of the cylinder is free from stresses and boundary conditions, leaving a cylinder in equilibrium, are assigned at the ends of a cylinder. The stated boundary-value problem is reduced to the spectral problem. The behavior of solutions to the spectral problem both in the inner part of a cylinder, and near the ends of a cylinder if the parameter of thinness of cylinder’s walls tends to zero, is studied. Three groups of solutions were obtained and the nature of the constructed homogeneous solutions was explained. The solution corresponding to the first iterative process determines the penetrating stressed-strained state of a cylinder. The solution corresponding to the second iterative process represents edge effects in the applied theory of shells. The third iterative process determines the solution which has the character of a boundary layer. The solution corresponding to the first and second iterative processes determines the internal stressed-strained state of the cylinder. In the first term of asymptotics, they can be regarded as a solution on the applied theory of shells. It was shown that the stressed-strained state, similar to the case of a homogeneous cylinder of small thickness, consists of three types: penetrating stressed state, simple edge effect and a boundary layer. The problem of meeting the boundary conditions on the ends of a radially non-homogeneous cylinder using the Lagrangian variation principle was considered.
References
- Ustinov, Yu. A. (2006). Matematicheskaya teoriya poperechno-neodnorodnyh plit. Rostov-na Donu: OOO’’CVVR’’, 257.
- Mekhtiev, M. F. (2018). Vibrations of Hollow Elastic Bodies. Springer, 212. doi: https://doi.org/10.1007/978-3-319-74354-7
- Mekhtiev, M. F. (2019). Asymptotic Analysis of Spatial Problems in Elasticity. Springer, 241. doi: https://doi.org/10.1007/978-981-13-3062-9
- Bazarenko, N. A., Vorovich, I. I. (1965). Asimptoticheskoe povedenie resheniya zadachi teorii uprugosti dlya pologo cilindra konechnoy dliny pri maloy tolshchine. Prikladnaya matematika i mekhanika, 29 (6), 1035–1052.
- Akhmedov, N. K. (1997). Analiz pogranichnogo sloya v osesimmetrichnoy zadache teorii uprugosti dlya radial'no-sloistogo cilindra i rasprostraneniya osesimmetrichnyh voln. Prikladnaya matematika i mekhanika, 61 (5), 863–872.
- Huang, C. H., Dong, S. B. (2001). Analysis of laminated circular cylinders of materials with the most general form of cylindrical anisotropy. International Journal of Solids and Structures, 38 (34-35), 6163–6182. doi: https://doi.org/10.1016/s0020-7683(00)00374-7
- Lin, H.-C., Dong, S. B. (2006). On the Almansi-Michell Problems for an Inhomogeneous, Anisotropic Cylinder. Journal of Mechanics, 22 (01), 51–57. doi: https://doi.org/10.1017/s1727719100000782
- Horgan, C. O., Chan, A. M. (1999). The pressurized hollow cylinder or disk problem for functionally graded isotropic linearly elastic materials. Journal of Elasticity, 55 (1), 43–59. doi: http://doi.org/10.1023/A:1007625401963
- Tarn, J.-Q., Chang, H.-H. (2008). Torsion of cylindrically orthotropic elastic circular bars with radial inhomogeneity: some exact solutions and end effects. International Journal of Solids and Structures, 45 (1), 303–319. doi: https://doi.org/10.1016/j.ijsolstr.2007.08.012
- Gol'denveyzer, A. L. (1963). Postroenie priblizhennoy teorii obolochek pri pomoshchi asimptoticheskogo integrirovaniya uravneniy teorii uprugosti. Prikladnaya matematika i mekhanika, 27 (6), 593–608.
- Akhmedov, N. K., Mekhtiev, M. F. (1993). Analiz trekhmernoy zadachi teorii uprugosti dlya neodnorodnogo usechennogo pologo konusa. Prikladnaya matematika i mekhanika, 57 (5), 113–119.
- Lur'e, A. I. (1970). Teoriya uprugosti. Moscow: Nauka, 939.
- Ustinov, Yu. A., Yudovich, V. I. (1973). O polnote sistemy elementarnyh resheniy bigarmonicheskogo uravneniya v polupolose. Prikladnaya matematika i mekhanika, 37 (4), 706–714.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2019 Natik Akhmedov, Sevda Akbarova, Jalala Ismayilova
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
