Effect of surface treatment of wood on the fire resistance of wooden structures
DOI:
https://doi.org/10.15587/1729-4061.2013.18104Keywords:
impregnation, wood, fire retardants, preservatives, performance modifications, burning, fire wood, charringAbstract
Flame spread during burning up of materials determines the intensity and dynamics of fire, depending on the effectiveness of the protection and the burn-up rate of building structures in the burning flame. A mathematical model of the burn-up rate of woodis given. For obtaining analytical equation the burning rate of refractory material is calculated with the corresponding value of the indicator of slowing down, installations, the change of particular structure and properties of the contact zone of the wood. A layer of wood is characterized by resistance to external sources of energy (high flame), which suggests the protective nature of the wood surface modifiers. Stability of modified wood was estimated to change the compressive strength on the average 3 times higher compared with the untreated wood structure burn-up. Thus, the treatment of wood helps to reduce the burn-up rate and hence increases the resistance of structures.References
- Тычино Н.А. Особенности практического применения огне- и биозащитных средств для пропитки древесины [Текст] / Н.А. Тычино // Пожаровзрывоопасность веществ и материалов. Вып. 6. – М.: ВНИИПО, 2002. – С. 38–43. – 3000 пр. – ISSN 0869-7493.
- Леонович А.А. Химический подход к проблеме снижения пожароопасности древесных материалов [Текст] / А.А. Леонович // Пожаровзрывоопасность веществ и материалов. Вып. 3. – М.: ВНИИПО, 1996. – С. 10–14. – 2000 пр. – ISSN 0869-7493.
- Бут В.П. Новый подход к огнебиозащите изделий из целлюлозы [Текст] / В.П. Бут, В.М. Жартовский и др. // Пожаровзрывобезопасность. – М.: ВНИИПО, 2004. – Вып. 5.– С. 31–32. – 3000 пр. – ISSN 0869-7493.
- Сивенков А.Б. Огнезащитные покрытия на основе модифицированных полисахаридов. Часть 3. Характеристики тепловыделения при пламенном горении и теплофизические свойства [Текст] / А.Б. Сивенков, Б.Б. Серков // Пожаровзрывоопасность. – М.: ВНИИПО.- 2002. - Вып. 3.- С. 13-19. – 3000 пр. – ISSN 0869-7493.
- ГОСТ 2140-81 Видимые пороки древесины. Классификация, термины и определения, способы измерения [Дата введения 1983-01-01]. - М.: Издательство стандартов, 1981. - 17 с.
- ГОСТ 20022.6-86 Пропитка способом прогрев-холодная ванна. Взамен ГОСТ 20022.6-76 - [Введен 01.07.87].-М.: Изд-во стандартов, 1986. – 7 с.
- ГОСТ 20022.9-76* Древесина, консервирование. Капиллярная пропитка способом нанесения на поверхность. Взамен ГОСТ 16416-70 -[Введен 01.01.78]. -М.: Изд-во стандартов, 1977. – 6 с.
- ГОСТ 12.1.044–1989 Межгосударственный стандарт. Пожаровзрывоопасность веществ и материалов. Номенклатура показателей и методы их определения [Дата введения 1991–01–01]. - М.: Издательство стандартов, 1990. – 143 с.
- СНиП II-25-80 Деревянные конструкции. – М. 1996.
- Пракшин Ю.К. Методика осмотра места пожара [Текст] / Ю.К. Пракшин, С.И. Зернов. – К.: РИО МВД УССР, 1988. – 168 с. ил.
- Шналь Тарас. Огнестойкость деревянных конструкций [Текст] / Тарас Шналь. – Львов. Издательство “Львовская политехника”, 2006.-220 с.
- Tychino N.A. (2002). Osobennosti prakticheskogo primenenija ogne- i biozaschitnih sredstv dlja propitki drevesini. Pozarovzrivoopasnost’ veshestv i materialov. Vip. 6. – Moscow, Russia, VNIIPO. 38-43, 0869-7493.
- Leonovich A.A. (1996). Khimicheskiy podhod k probleme snizenia pozaroopasnosti drevesnih materialov. Pozarovzrivoopasnost’ veshestv i materialov. Vip. 3. - Moscow, Russia, VNIIPO. 10-14, 0869-7493.
- But V.P. (2004). Noviy podhod k ognebiozashite izdeliy iz cellulozi. Pozarovzrivobezopasnost’ Vip. 5.– Moscow, Russia, VNIIPO. –31-32, 0869-7493.
- Sivenkov A.B. (2002). Ognezashitnie pokritija na osnove modifitsirovanih polisaharidov. Chast’ 3. Kharakteristiki teplovidilenija pri plamennom gorenii i teplophizicheskie svoistva. Pozarovzrivo-opasnost’. Vip. 3. Moscow, Russia, VNIIPO. 13-19, 0869-7493.
- GOST 2140-81 Vidimie poroki drevesini. Klassifikatsija, termini i opredelenija, sposobi izmerenija. Moscow, USSR, Izdatel’stvo standartov, 1981. 17.
- GOST 20022.6-86 Propitka sposobom progrev – holodnaja vanna. Vzamen GOST 20022.6-76. – Moscow, USSR, Izdatel’stvo standartov, 1986. 7.
- GOST 20022.9-76* Drevesina, konservirovanie. Kappilarnaja propitka sposobom nanesenija na poverhnost’. Vzamen GOST 16416-70. – Moscow, Russia, Izdatel’stvo standartov, 1977. 6.
- GOST 12/1/044-1989 Pozarovzrivoopasnost’ veshestv i materialov. Nomenkulatura pokazatelei i metodi ih opredelenija. – Moscow, USSR, Izdatel’stvo standartov, 1990. 143.
- SNiP II-25-80 Derevjznie konstruktsii. – Moscow, Russia, 1996.
- Prakshin Ju.K. Metodika osmotra mesta pozhara. – Kyiv, USSR, 1988. 168.
- Shnal’ Taras. (2006). Ognestoikost’ derevjanih konstruktsiy. – Lviv, Ukraine, Izdatel’stvo “Lvovskaja politehnika”, 220.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Юрий Владимирович Цапко
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.