Modeling of the transport and production complex in the growing of agricultural crops, taking into account the aviation component
DOI:
https://doi.org/10.15587/1729-4061.2020.198742Keywords:
technological process, No-till technology, subsystem, set of operations, types of resources, process chart, aviation equipment, ground equipmentAbstract
Studies of the transport and technological process of growing crops revealed that it is a complex dynamic system. It is proved that the complexity of this system consists in the presence of a large number of heterogeneous subsystems, including transport, which is an important component for growing crops. Due to the system approach to the study of transport support of the crop growing process, it became possible to identify functional features of using ground and aviation vehicles. The properties of each stage of the growing process and involvement of certain types of vehicles are determined.
The scheme of transport support of the crop growing process is developed and the influence of the aviation component at certain stages in the introduction of resource-saving No-till technology is determined.
Experimental studies showed that the use of aviation transport contributes to the introduction of resource-saving No-till technology by minimizing the mechanical processing of sown areas, which reduces the anthropogenic load on the soil.
The developed mathematical model for analyzing the use of the transport and production complex in growing crops allows making a rational choice of ground and aviation vehicles, depending on the parameters of technologies, types of crops.
Thus, there is reason to argue that it is possible to make timely and reasonable management decisions in the organization and management of agricultural production in order to maximize profitsReferences
- Pron, S. V. (2016). Osnovy formuvannia intehrovanoi transportnoi systemy vyroshchuvannia zernovykh kultur. Avtomobilni dorohy i dorozhnie budivnytstvo, 96, 192–199.
- Vasylkovska, K. V., Leshchenko, S. M., Vasylkovskyi, O. M., Petrenko, D. I. (2016). Improvement of equipment for basic tillage and sowing as initial stage of harvest forecasting. INMATEH, 50 (3), 13–20.
- Popovych, P. V., Lyashuk, O. L., Murovanyi, I. S., Dzyura, V. O., Shevchuk, O. S., Myndyuk, V. D. (2016). The service life evaluation of fertilizer spreaders undercarriages. INMATEH, 50 (3), 39–46.
- Mostypan, M. I., Vasylkovska, K. V., Andriyenko, O. O., Reznichenko, V. P. (2017). Modern aspects of tilled crops productivity forecasting. INMATEH, 53 (3), 35–40.
- Vasylkovska, K. V., Vasylkovskyi, O. M., Sviren, M. O., Petrenko, D. I. et. al. (2019). Determining the parameters of the device for inertial removal of excess seed. INMATEH, 57 (1), 135–140. doi: https://doi.org/10.35633/inmateh_57_14
- Krivutsa, Z. F. (2010). Ispol'zovanie matematicheskih modeley dlya optimizatsii raboty avtomobil'nogo transporta. Mehanizatsiya i elektrifikatsiya tehnologicheskih protsessov v sel'skohozyaystvennom proizvodstve, 17, 136.
- Sharifov, F. A., Yun, H. M., Kandyba, H. Yu. (2014). Optimal route of aircraft for agroaviation works. Science-based technologies, 23 (3), 319–325. doi: https://doi.org/10.18372/2310-5461.23.7415
- Marintseva, K., Yun, G., Kachur, S. (2015). Resource allocation improvement in the tasks of airport ground handling operations. Aviation, 19 (1), 7–13. doi: https://doi.org/10.3846/16487788.2015.1015291
- Soloviova, O. O., Herasymenko, I. M., Rovnenko, M. M. (2011). Ekonomichna efektyvnist vykorystannia aviatsiyi v silskomu hospodarstvi v porivnianni z nazemnoiu tekhnikoiu. Visnyk Khmelnytskoho natsionalnoho universytetu. Ekonomichni nauky, 1 (171), 194–198.
- Enaleeva-Bandura, I. M., Danilov, A. G., Nikonchuk, A. V., Davydova, A. L. (2017). A dynamic model of transport-technological process of transporting wood raw material in a multiproduct setting. Hvoynye boreal'noy zony, 1-2, 84–87.
- Pron, S. V., Vysotska, I. I. (2016). Theoretical aspects of the concept transport system of agricultural works. Molodyi vchenyi, 4, 252–256.
- Makhmud el Asskar, Bykova, O. Ye. (2009). Vplyv tekhnolohiyi No-till u zonakh nedostatnoho zvolozhennia na vlastyvosti gruntiv i produktyvnist kultur. Visnyk ahrarnoi nauky, 2, 25–28.
- Huzhvenko, S. M. (2016). Osoblyvosti planuvannia pid chas vykorystannia innovatsiynykh system tekhnolohiy u vyrobnychiy diyalnosti ahrarnoho pidpryiemstva. Ekonomika i suspilstvo, 7, 260–265. Available at: http://economyandsociety.in.ua/journal/7_ukr/44.pdf
- Pidsumky diyalnosti aviatsiynoi haluzi Ukrainy. Available at: http://avia.gov.ua/
- Statystychni dani v haluzi aviatransportu. Available at: https://mtu.gov.ua/content/statistichni-dani-v-galuzi-aviatransportu.html
- Hess, L. J. T., Hinckley, E.-L. S., Robertson, G. P., Matson, P. A. (2020). Rainfall intensification increases nitrate leaching from tilled but not no-till cropping systems in the U.S. Midwest. Agriculture, Ecosystems & Environment, 290, 106747. doi: https://doi.org/10.1016/j.agee.2019.106747
- Wang, J., Zou, J. (2020). No-till increases soil denitrification via its positive effects on the activity and abundance of the denitrifying community. Soil Biology and Biochemistry, 142, 107706. doi: https://doi.org/10.1016/j.soilbio.2020.107706
- Ferreira, C. dos R., Silva Neto, E. C. da, Pereira, M. G., Guedes, J. do N., Rosset, J. S., Anjos, L. H. C. dos. (2020). Dynamics of soil aggregation and organic carbon fractions over 23 years of no-till management. Soil and Tillage Research, 198, 104533. doi: https://doi.org/10.1016/j.still.2019.104533
- Pron, S. V., Vysotska, I. I., Soloviova, O. O. (2017). Modeliuvannia vykonannia ahrarnykh robit z urakhuvanniam transportnoi skladovoi. Avtomobilni dorohy i dorozhnie budivnytstvo, 100, 331–340.
- Sait korporatsiyi «Ahro-Soiuz». Available at: http://www.agrosoyuz.ua/products/tech-conf-educ/plant-growing
- American Optimal Decisions. Available at: http://www.aorda.com
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Svitlana Pron, Olena Soloviova, Iryna Herasymenko, Iryna Borets
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.