Optimization of the stages of a ship's cargo plan development for shippining of general cargoes
DOI:
https://doi.org/10.15587/1729-4061.2021.241487Keywords:
cargo plan, trim, general cargo, trimming moment, stability of the vesselAbstract
One of the main tasks in stability calculations is to provide the ship with the necessary (optimal) trim whose final value is influenced by the arrangement of cargo on the ship. Today, however, there are rules and requirements but there is no unified approach to developing a cargo plan for a vessel that simultaneously transports various types of general cargo.
In order to improve the efficiency of the above calculations, a procedure has been proposed to optimize developing a cargo plan for a vessel carrying heterogeneous general cargoes at the same time, the main idea of which is to distribute consignments on the ship in two stages, taking into consideration the compensating trimming moment. The scheme to develop a cargo plan has been improved by introducing the developed procedure. The results of verification confirmed its effectiveness in practice.
Possible deviations of the values for the trim required (optimal) for the voyage from the actual one calculated after the allocation of stocks and consignments of goods have been investigated using an example of the series of developed cargo plans. It should be noted that the value for the trim, required (optimal) and actual, for each individual cargo plan does not differ by more than 8 %.
The results reported in this paper give grounds to assert the expediency of their application when developing cargo plans for tramp shipping vessels. The introduction of the procedure could make it possible to effectively load a vessel with the full utilization of both its carrying capacity and cargo capacity. The use of the proposed scheme for developing a cargo plan to transport heterogeneous cargoes would reduce the total time for calculating the stability and strength of the vessel in general
References
- Komchuk, E. (2020). V OON ozhidayut, chto rynok morskih perevozok vosstanovitsya v 2021 godu. Mintrans. Available at: https://mintrans.news/porty/v-oon-ozhidayut-chto-rynok-morskikh-perevozok-vosstanovitsya-v-2021-godu
- House, D. J. (2005). Cargo Work: for Maritime Operations. Routledge, 344. doi: https://doi.org/10.4324/9780080457390
- Stoimost' morskih gruzoperevozok vyrosla do rekordnogo urovnya (2021). Available at: https://www.tks.ru/logistics/2021/06/23/0002
- Stowage planning. The next step in visual cargo planning software. Available at: https://www.videck.com/stowage-planning/
- General Cargo Planning. AMT. Available at: https://www.amtmarine.ca/Pages/54/SimpleStowGC_Overview
- Aksyutin, L. R. (2005). Gruzovoy plan sudna. Odessa, 139. Available at: https://www.twirpx.com/file/325796/
- Snopkov, V. I. (2006). Tekhnologiya perevozki gruzov morem. Sankt-Peterburg, 560. Available at: https://navlib.net/wp-content/uploads/2013/11/%d0%a1%d0%bd%d0%be%d0%bf%d0%ba%d0%be%d0%b2%20%d0%92.%d0%98.%20%d0%a2%d0%b5%d1%85%d0%bd%d0%be%d0%bb%d0%be%d0%b3%d0%b8%d1%8f%20%d0%bf%d0%b5%d1%80%d0%b5%d0%b2%d0%be%d0%b7%d0%ba%d0%b8%20%d0%b3%d1%80%d1%83%d0%b7%d0%be%d0%b2%20%d0%bc%d0%be%d1%80%d0%b5%d0%bc%20-%202001%20(560%d1%81.)%5bISBN%205-94365-005-9%5d-1.pdf
- Lv, X., Wu, X., Sun, J., Tu, H. (2013). Trim Optimization of Ship by a Potential-Based Panel Method. Advances in Mechanical Engineering, 5, 378140. doi: https://doi.org/10.1155/2013/378140
- Gao, X., Sun, K., Shi, S., Wu, B., Zuo, Z. (2019). Research on Influence of Trim on a Container Ship’s Resistance performance. Journal of Physics: Conference Series, 1300, 012105. doi: https://doi.org/10.1088/1742-6596/1300/1/012105
- Drouet, A., Sergent, P., Causeur, D., Corrignan, P. (2017). Trim optimisation in waves. VII International Conference on Computational Methods in Marine Engineering, 592–603. Available at: https://upcommons.upc.edu/bitstream/handle/2117/331910/Marine-2017-47_Trim%20optimisation%20in%20waves.pdf?sequence=1&isAllowed=y
- Chen, J., Yu, C., Shen, L. (2019). Study of Trim Optimization Based on Design of Experiments and RANS Simulation. 11th International Workshop on Ship and Marine Hydrodynamics. Hamburg.
- Reichel, M., Minchev, A., Larsen, N. L. (2014). Trim Optimisation - Theory and Practice. TransNav, the International Journal on Marine Navigation and Safety of Sea Transportation, 8 (3), 387–392. doi: https://doi.org/10.12716/1001.08.03.09
- LoadSafe Loading calculator software. CONMAR. Available at: https://www.veristar.com/rest/jcr/repository/collaboration/sites/veristarinfo/web%20contents/bv-content/software/software/documents/2293.4.LoadSafePresentation_En.pdf
- ShipLoad - Ship Trim and Stability calculator. TheNavalArch. Available at: https://www.youtube.com/watch?v=XSfbYMvkuoQ
- ShipStab Ship Trim and Stability Calculator TheNavalArch. TheNavalArch. Available at: https://www.youtube.com/watch?v=3-KDVwZR4Vg
- Teplohod «Ruzhany». Available at: https://sources.ruzhany.info/025.html
- Thomas, R. E., Thomas, O. O., Agnew, J., Cole, K. L., Rankin, K. (1996). Thomas' stowage the properties and stowage of cargoes. Glasgow.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Oleksandr Loshkarov, Olga Kornelyuk
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.