Devising a procedure to calculate and analyze parameters for passing the flood and breakthrough wave taking into consideration the topographical and hydraulic riverbed irregularities
DOI:
https://doi.org/10.15587/1729-4061.2022.252710Keywords:
breakthrough wave, topographic and hydraulic heterogeneities, model of riverbed flow kinematicsAbstract
It has been established that the most likely period of breakthrough wave occurrence is the time of spring flooding or heavy rain when water-head facilities are subjected to significant loads that lead to the collapse of their individual elements or the entire structure. In addition, the possibility of man-made accidents that can occur at any time cannot be ruled out.
It has been proven that breakthrough wave formation depends on the nature of the destruction or the overflow through a water-head facility. For the study reported in this paper, a model of the kinematics of riverbed and breakthrough flows was used, which is based on the equations of flow, washout, and transport of sediments that are averaged for the depths of the stream. The differential equations describing the nonstationary flow averaged for depth are solved using the numerical grid system FST2DH (2D Depth-averaged Flow and Sediment Transport Model), which implements a finite-element method on the plan of a riverbed's topographic region. These tools are publicly available, which allows their wide application to specific loads and boundary conditions of mathematical models.
The construction of an estimation grid involving the setting of boundary conditions and the use of geoinformation system tools makes it possible to simulate the destruction of a culvert of the pressure circuit and obtain results for a specific case of an actual riverbed and a water-head facility.
It has been established that there is a decrease in the speed of wave propagation along the profile, from 3 m/s to 1 m/s.
The impact of bottom irregularities, the effect of floodplains, and the variety of bottom roughness have also been assessed, compared to the results of their calculation based on one-dimensional models given in the regulatory documents.
Hydraulic calculations were carried out taking into consideration the related properties of the main layer of the floodplain, which consists of peat accumulations, and the heterogeneity of the depths and roughness of floodplain surfaces of soils. It has been established that there is almost no erosion of supports in the floodplain zone in this case.
It was found that as the distance between the flow and breakthrough intersection increases, there is a decrease in the height of the head from 2.1 m to 1.25 m.
References
- Bondar, А. I., Мykhaylenko, L. Е., Vaschenko, V. N., Lapshin, Y. S. (2014). Suchasni problemy hidrotekhnichnykh sporud v Ukraini. Visn. NAN Ukrainy, 2, 40–47. Available at: http://www.visnyk-nanu.org.ua/sites/default/files/files/Visn.2014/2/8.Bondar.pdf
- Kim, B. (2014). Resilience Assessment of Dams’ Flood-Control Service. Journal of the Korean Society of Civil Engineers, 34 (6), 1919. doi: https://doi.org/10.12652/ksce.2014.34.6.1919
- Strygina, M. A., Gritsuk, I. I. (2018). Hydrological safety and risk assessment of hydraulic structures. RUDN Journal of Engineering Researches, 19 (3), 317–324. doi: https://doi.org/10.22363/2312-8143-2018-19-3-317-324
- Goncharova, O., Bunina, Y., Gaidukova, M., Egorov, V., Mikheeva, O. (2020). Wave breakthrough factor in dam destruction. IOP Conference Series: Materials Science and Engineering, 1001 (1), 012099. doi: https://doi.org/10.1088/1757-899x/1001/1/012099
- Chen, Y., Lin, P. (2018). The Total Risk Analysis of Large Dams under Flood Hazards. Water, 10 (2), 140. doi: https://doi.org/10.3390/w10020140
- SNIP 2.05.03-84 "Bridges and Underpasses" Handbook on Surveying and Design of Railroad and Road Bridge Crossings of Streams. Moscow: Transstroy, 177–186.
- Slavinska, O., Tsynka, А., Bashkevych, I. (2020). Predicting deformations in the area of impact exerted by a bridge crossing based on the proposed mathematical model of a floodplain flow. Eastern-European Journal of Enterprise Technologies, 4 (7 (106)), 75–87. doi: https://doi.org/10.15587/1729-4061.2020.208634
- Morales, R., Ettema, R. (2013). Insights from Depth-Averaged Numerical Simulation of Flow at Bridge Abutments in Compound Channels. Journal of Hydraulic Engineering, 139 (5), 470–481. doi: https://doi.org/10.1061/(asce)hy.1943-7900.0000693
- Veremenyuk, V. V., Ivashechkin, V. V., Nemerovets, O. V. (2019). Modeling of Process for Level Changes in Cascade of Two Channel Water Reservoirs in Case of Flooding. Science & Technique, 18 (2), 146–154. doi: https://doi.org/10.21122/2227-1031-2019-18-2-146-154
- Zhaparkulova, Y., Nabiollina, M., Amanbayeva, B. (2019). Methods of forecasting calculations of breakthrough wave at hydrodynamic accidents waterstorage dam. E3S Web of Conferences, 97, 05033. doi: https://doi.org/10.1051/e3sconf/20199705033
- Chanson, H. (2004). Hydraulics of Open Channel Flow. Butterworth-Heinemann. doi: https://doi.org/10.1016/b978-0-7506-5978-9.x5000-4
- Froehlich, D. C. (2003). User’s Manual for FESWMS FST2DH Two-dimensional Depth-averaged Flow and Sediment Transport Model. Release 3.
- QGIS Training Manual. Available at: https://docs.qgis.org/testing/en/docs/training_manual/
- Greco, M., Mirauda., D., Plantamura, V. (2014). Manning’s Roughness Through the Entropy Parameter for Steady Open Channel Flows In Low Submergence. Procedia Engineering, 70, 773–780. doi: https://doi.org/10.1016/j.proeng.2014.02.084
- Al-Hashimi, S. A. M., Madhloom, H. M., Nahi, T. N., Al-Ansari, N. (2016). Channel Slope Effect on Energy Dissipation of Flow over Broad Crested Weirs. Engineering, 08 (12), 837–851. doi: https://doi.org/10.4236/eng.2016.812076
- REEF3D User Guide 19.05. Marine Civil Engineering NTNU Trondheim. Available at: https://reef3d.files.wordpress.com/2019/05/reef3d-userguide_19.05.pdf
- Stepanov, K. A. (2013). Simplified method for simulation of a dam-break wave propagation to protect lands from flooding. Nauchniy zhurnal Rossiyskogo NII problem melioratsii, 4 (12), 130–140. Available at: http://www.cawater-info.net/bk/dam-safety/files/stepanov.pdf
- Koretskyi, A., Onyshchenko, A., Ostroverh, B., Bashkevych, I., Potapenko, L. (2020). Assessment of the impact of a dam break on the durability of the transport structure. Dorogi i Mosti, 21, 226–235. doi: https://doi.org/10.36100/dorogimosti2020.21.226
- Vasquez, J. A., Roncal, J. J. (2009). Testing RIVER2D and FLOW-3D for sudden dam-break flow simulations. CDA 2009 Annual Conference. Whistler. Available at: https://www.researchgate.net/publication/327671462_TESTING_RIVER2D_AND_FLOW-3D_FOR_SUDDEN_DAM-BREAK_FLOW_SIMULATIONS
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Artur Onyshchenko, Borys Ostroverkh, Liudmyla Potapenko, Vitalii Kovalchuk, Oleksndr Tokin, Mykola Harkusha, Iryna Bashkevych, Andrii Koretskyi, Nadiia Khvoshchynska, Iryna Rolinska
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
