Basic throttling schemes of gas mixture synthesis systems
DOI:
https://doi.org/10.15587/1729-4061.2014.26257Keywords:
basic throttling scheme, gas-dynamic system, gas mixture synthesis, capillaryAbstract
Gas dynamic synthesizers (GDS) are one of the most promising means of preparing complex mixtures of given composition, in particular for checking the gas analysis equipment. This is caused by both versatility (the ability to synthesize a wide range of mixtures) of GDS and their potentially high precision of setting and maintaining concentrations of the components of the synthesized mixtures. Providing high metrological and performance characteristics of synthesizers is possible due to the optimal combination of basic throttling schemes in the developed principal schemes of GDS.
Information on the throttling schemes that can be used in GDS - connection by the scheme of flow summarizer, flow divider, parallel and sequential, as well as combined connection of pressure and flow dividers was presented in the paper. The mathematical description of basic throttling schemes provides efficient modeling of the developed gas-dynamic devices, including GDS was given.
An example of using the studied basic connections of throttles is developing the principal scheme of GDS of gas mixtures with microconcentrations of components. In the synthesizer, due to a combination of features of the flow summarizer with packages of line dosing capillaries, fixed in channels and cascade connection of line pressure dividers for setting and maintaining the pressure drops in the dosing capillaries, preparing complex gas mixtures with microconcentrations of components at the same stage (without the loss of pure components and intermediate gas mixtures) and accuracy of maintaining the given concentration of components, higher than in the known synthesis means was provided.
References
- Rejman, L. V. (1985). Tehnika mikrodozirovanija gazov. (Metody i sredstva dlja poluchenija gazovyh smesej). Leningrad, USSR: Himija, 224.
- Nelson, G. O. (1992). Gas mixtures: preparation and control. Lewis Publishers, 294.
- Bondarenko, V. L., Losjakov, N. P., Simonenko, Ju. M., D'jachenko, O. V., D'jachenko, T. V. (2012). Metody prigotovlenija smesej na osnove inertnyh gazov. Vestnik MGTU im. N.Je.Baumana. Ser. "Mashinostroenie", 8, 41–53.
- Helwig, N., Schuler, M., Bur, C. & Schutze, A. (2014). Gas mixing apparatus for automated gas sensor characterization. Measurement Science and Technology, 25 (5). doi: 10.1088/0957-0233/25/5/055903
- Gerasimov, A. P., Krasavin, A. V., Bykov, I. A. (2014). Mikrosoplovyj komparator dlja kalibrovki (poverki) kriticheskih mikrosopel. Izmeritel'naja tehnika, 3, 41–44.
- Demichelis, A., Sassi, G., Sassi, M. P. (2012). Metrological performances of mass flow controllers for dynamic gas diluition. 20th IMEKO World Congress 2012. Busan, Republic of Korea, 1, 1014–1017.
- Teplyukh, Z. M. (2006). Pryntsypy pobudovy vysokotochnykh drosel'nykh syntezatoriv hazovykh sumishey. Visnyk Natsional'noho universytetu "L'vivs'ka politekhnika" "Avtomatyka, vymiryuvannya ta keruvannya", 551, 87–94.
- Kremlevskij, P. P. (2002). Rashodomery i schetchiki kolichestva veshhestv: spravochnik: Kn.1. Sankt-Peterburg, Russia: Politehnika, 409.
- Dilay, I. (2013). Osnovy pobudovy drosel'nykh syntezatoriv hazovykh sumishey z mikrokontsentratsiyamy komponentiv. Visnyk Ternopil's'koho NTU, 2, 164–172. Available at: http://elartu.tntu.edu.ua/handle/123456789/2783
- Dilay, I. V. (2013). Modelyuvannya paralel'noho z"yednannya drosel'nykh elementiv. Visnyk Natsional'noho universytetu "L'vivs'ka politekhnika" "Teploenerhetyka. Inzheneriya dovkillya. Avtomatyzatsiya", 758, 192–198.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Ігор Володимирович Ділай, Зеновій Миколайович Теплюх, Юрій Зіновійович Вашкурак
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
