AUTOMATION CONTROL ELONGATION PARTS USING FUZZY LOGIC
DOI:
https://doi.org/10.15587/1729-4061.2012.4204Keywords:
fuzzy logic, powder materials, fuzzy control, automated control.Abstract
This article describes how to create models of automated control systems elongation details using fuzzy logic and a model of the system in a package Simulink.References
- Лебедев А.А.. Ковальчук Б.И., Гигиняк Ф.Ф., Ламашевский В.П. Механические свойства конструкционных материалов при сложном состоянии/Справочник-Киев: Наукова думка,1983.- 366с.
- Полухин П.И., Гун Г.Я., Галкин А.М. Сопротивление пластической деформации металлов исплавов./Справочник-М:.Металургия,1976.-488с.
- Писеренко Г.С., Лебедев А.А. Деформирование и прочность материалов при слоном напряженном состояний.-Киев.: Наукова думка,1976.-415с.
- Кайбышев О.А., Васин Р.А., Бердин В.К., Кашаев Р.М. Установка для проведения испытаний материалов в условиях сложного нагружения/ Заводская лаборатория. Диагностика материалов. 2000. №4(т.66).с.50-53.
- Смолянкин О.А. Автоматизированный комплекс для определения механических характеристик при сложном нагружении. Реологічні моделі та процеси деформування пористих і композиційних матеріалів. 1997, с35-36.
- Иван ван Лейнингем. Освой Python за 24 часа. М.:Вильямс, 2001. – 448 с.
- Philip Wasserman. Neural Computing - Theory and Practice. 1989. – 230 с.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Олег Олексійович Смолянкін, Людмила Миколаївна Маркіна, Андрій Володимирович Фляк
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
