Production of low density carbon carbonized materials

Authors

  • Анна Владимировна Карпенко Zaporozhye State Engineering Academy Lenina, 226, Zaporozhye, Ukraine, 69006, Ukraine
  • Виктор Алексеевич Скачков Zaporozhye State Engineering Academy Lenina, 226, Zaporozhye, Ukraine, 69006, Ukraine
  • Иван Федорович Червоный Zaporozhye State Engineering Academy Lenina, 226, Zaporozhye, Ukraine, 69006, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.9297

Keywords:

carbon-carbon composite material, carbonization, expanding agent, density, heat insulation.

Abstract

The formation of carbonized carbon-carbon composite materials with a specified structure and physicomechanical properties is an important task; and the methods of calculation of technological modes of obtaining such materials are of great scientific interest. The study aims to create the low-density carbon-carbon composite material based on carbon fibers and phenol-formaldehyde binder with the introduction of organic expanding agents. The use of the organic expanding agents permitted to produce the composite materials with controlled density of 0,4 ... 0,8 ∙ 103 kg/m3. The basic technological properties of the expanding agents were studied and the formula to produce carbon materials with predetermined properties was recommended. This approach of carbonization of the low-density carbon-carbon composite materials with the expanding agents permits to develop rational modes of production of products of different dimensions and forms, used for heat-insulation of electrovacuum equipment.

Author Biographies

Анна Владимировна Карпенко, Zaporozhye State Engineering Academy Lenina, 226, Zaporozhye, Ukraine, 69006

Assistant

Department of nonferrous metals

Виктор Алексеевич Скачков, Zaporozhye State Engineering Academy Lenina, 226, Zaporozhye, Ukraine, 69006

PhD, Associate Professor

Department of nonferrous metals

Иван Федорович Червоный, Zaporozhye State Engineering Academy Lenina, 226, Zaporozhye, Ukraine, 69006

Doctor of Technical Sciences, Professor, Head of Department

The Department of Non-Ferrous Metallurgy

References

  1. Фиалков, А. С. Углерод, межслоевые соединения и композиты на его основе [Текст] / А. С. Фиалков - М. : Аспект Пресс, 1997. - 714 с. - Библиогр. : с. 662-711. - 2000 экз. - ISBN 5-756701907.
  2. Мармер, Э. Н. Электропечи для термоакуумных процессов [Текст] / Э. Н. Мармер, С. Г. Мурованная, Ю. Э. Васильев; 2-е изд. перераб. и доп. - М. : Энергоатомиздат, 1991. - 232 с. - Библиогр. : с. 219-229. - ISBN 5-283-00597-6.
  3. Карпенко, А.В. Формирование заготовок углерод - углеродных композиционных материалов из водных суспензий [Текст] / В.А Скачков., С.С. Кудиевский, А.В. Карпенко, Р.А. Шаповалов // Металлургия : сб. науч. трудов. – Запорожье : ЗГИА, 1999. - Выпуск №2. - С. 82-87.
  4. Конкин, А. А. Углеродные и другие жаростойкие волокнистые материалы [Текст] / А. А. Конкин. - М. : Химия, 1974. - 376 с.

Published

2013-02-05

How to Cite

Карпенко, А. В., Скачков, В. А., & Червоный, И. Ф. (2013). Production of low density carbon carbonized materials. Eastern-European Journal of Enterprise Technologies, 1(5(61), 48–51. https://doi.org/10.15587/1729-4061.2013.9297