Vol. 5 No. 1 (107) (2020): Engineering technological systems

Engineering technological systems

• The modernization concept of aircraft An-26 and An-140 based on the use of a hybrid power system

  Volodymyr Shmyrov, Vasyl Loginov, Sergii Fil, Andrii Khaustov, Olexander Bondarchuk, Andrii Kalashnikov, Glib Khmelnitskiy

  6-17

  • PDF

• Ensuring the functional properties of responsible structural plastic elements by means of 3-D printing

  Alexandr Salenko, Petro Melnychuk, Evgeny Lashko, Olga Chencheva, Oleksiy Titarenko, Igor Derevianko, Alexandr Samusenko

  18-28

  • PDF

• Design and development of high-accuracy machine for wire bending

  Faiz F. Mustafa, O. Hussein, Osamah F Fakhri, Ahmed H Sabri

  29-35

  • PDF

• Study of seed agitation in the fluid of a hydropneumatic precision seeder

  Valerii Pastukhov, Vladyslav Boiko, Hennadii Tesliuk, Vasyl Ulexin, Roman Kyrychenko

  36-43

  • PDF

• Studying the operational efficiency of the centrifugal-impact feed grain crusher of the new design

  Michael Volkhonov, Anton Abalikhin, Alexander Krupin, Ivan Maximov

  44-51

  • PDF

• Experimental substantiation of the rational parameters for a reaping machine of the comb type for harvesting oil flax seeds

  Olecsiy Kozachenko, Andrii Pakhuchyi, Olexander Shkregal, Sergiy Sorokin, Sergey Dyakonov, Мykola Gusarenko, Volodymyr Kadenko

  52-59

  • PDF

• Development of operational requirements for self-propelled combine-harvesters with the capabilities of mobile energy devices

  Viktor Sheichenko, Alvian Kuzmych, Viktor Niedoviesov, Mykhailo Aneliak, Oleksandra Bilovod, Vitaliy Shevchuk, Tetiana Kutkovetska, Mykola Shpilka

  60-70

  • PDF

• Development of an adaptive method for regulating corset comfort based on the parameters of design zones identification

  Alla Slavinska, Oksana Syrotenko, Victoriia Mytsa, Oksana Dombrovska

  71-81

  • PDF

• Devising a procedure for examining the quality of prints of digital and offset printing on corrugated cardboard

  Svitlana Khadzhynova, Svitlana Havenko

  81-89

  • PDF

• Determining the regime parameters for the surface cleaning of post-consumer wood by a needle milling tool

  Serhiy Gayda, Orest Kiyko

  89-97

  • PDF

• Analysis of the influence of the systemic welding coordination on the quality level of joints

  Oleh Haievskyi, Viktor Kvasnytskyi, Volodymyr Haievskyi, Constantine Zvorykin

  98-109

  • PDF

• Predicting the shape formation of parts with a flange and an axial protrusion in the process of combined aligned radial-direct extrusion

  Natalia Hrudkina, Leila Aliieva, Oleg Markov, Khrystyna Malii, Liudmyla Sukhovirska, Mykola Kuznetsov

  110-117

  • PDF

• Improving the thermal method for assessing the technical condition of rolling bearings based on the heating rate criterion

  Nataliia Peretiaka, Konstantin Boryak, Oleksandr Vatrenko

  118-126

  • PDF

• Identifying changes in the milking rubber of milking machines during testing and under industrial conditions

  Andriy Paliy, Artem Naumenko, Anatoliy Paliy, Svitlana Zolotaryova, Andrey Zolotarev, Ludmyla Tarasenko, Oleksandr Nechyporenko, Larysa Ulko, Oleksandr Kalashnyk, Yurii Musiienko

  127-137

  • PDF