Vol. 4 No. 1 (118) (2022): Engineering technological systems

Published: 2022-08-31

Full Issue

ABSTRACT AND REFERENCES

Engineering technological systems

Comparative evaluation of the efficiency of the ring-type and bucket inlet devicesfor a power plant with a turbopropfan engine

Oleg Zhornik, Igor Kravchenko, Mykhailo Mitrakhovych, Kateryna Balalaieva

6-12
- PDF
Re-designing of railway carriages to increase ergonomic and accessible: a case study of indonesian railway

Sugiono Sugiono, Dwi H. Sulistyorini, Nurus Sakinah, Willy Satrio Nugroho

13-22
- PDF
Development of the design and technology of extrusion of metal-polymer mixtures for the production of feedstocks

Madina Isametova, Bakhyt Absadykov, Bauyrzhan Bazarbay, Gulbarshyn Smailova

23-33
- PDF
Revealing the mechanism of stability loss of a two-fraction granular flow in a rotating drum

Kateryna Deineka, Yuriy Naumenko

34-46
- PDF
A numerical implementation study of the stresses and noise generated by the gear engagement in the gearbox

Ali Abbar Khleif

47-55
- PDF
Effects of rotational speed on the natural frequency of the differential bevel gear

Ali Raad Hassan

56-63
- PDF
Implementation of finite element analysis for solving the constraints in forming process of large steel parts

Kamil Jawad Kadhim, Jabbar A. Jaber, Hadi Raheem Ibrihim

64-71
- PDF
Determining foaming regularities enabled by a five-nozzle foam generator for drilling technologies under conditions of abnormally low pressures

Anatolii Kaliuzhnyi, Petro Molchanov, Vasyl Savyk, Maksym Knysh, Roman Yaremiychuk

72-79
- PDF
Justifying parameters for the automatic servo control system of a rotary plate vacuum pump in the milking machine

Elchyn Aliiev, Andriy Paliy, Viktor Kis, Andriy Milenin, Katerina Ishchenko, Anatoliy Paliy, Iruna Levchenko, Lyudmila Livoshchenko, Yevheniia Livoshchenko, Larisa Plyuta

80-89
- PDF
Application of intensive technologies for improved production processes in poultry farms

Rovshan Mustafa Hajiyev, Kamala Salmanova, Gabil Mammadov, Urfan Taghiyev

90-102
- PDF
Improving the technique for assessing the condition and predicting the wear of the rock destruction tool equipment

Jaroslav Grydzhuk, Andriy Dzhus, Andriy Yurych, Lidiia Yurych, Maksym Dorokhov, Andrii Livinskyi

103-109
- PDF