Vol. 4 No. 1 (130) (2024): Engineering technological systems

Engineering technological systems

• 

  Determining the influence of façade parameters and the width of a fire-proof eaves on preventing the spread of fire through external vertical structures of buildings

  Oleksandr Kagitin, Roman Veselivskyi, Andrii Havrys, Yaroslav Ballo, Roman Yakovchuk, Bohdan Kovalyshyn

  6-16

  • PDF
• 

  Effect of box beam wall thickness on the stiffness of the camphor wood timber bridge truss

  Handika Setya Wijaya, Blima Oktaviastuti, Fifi Damayanti, Yeni Sesti Ariningsih

  17-26

  • PDF
• 

  Identifying the effect of subgrade layer thickness of soil stabilized with waste foundry sand and fly ash on bearing capacity

  Anita Setyowati Srie Gunarti, Yulvi Zaika, As’ad Munawir, Eko Andi Suryo, Harimurti Harimurti

  27-36

  • PDF
• 

  Designing a helical knife for a shredding drum using a sweep surface

  Serhii Pylypaka, Vyacheslav Hropost, Viktor Nesvidomin, Tetiana Volina, Mykhailo Kalenyk, Mykola Volokha, Olha Zalevska, Ivan Shuliak, Serhii Dieniezhnikov, Svetlana Motsak

  37-44

  • PDF
• 

  Substantiating the structural and technological parameters of tillage rotary X-like working bodies

  Igor Shevchenko, Gennadii Golub, Nataliya Tsyvenkova, Iryna Shevchenko, Liudmyla Titova, Ivan Omarov, Olena Sukmaniuk, Volodymyr Kulykivskyi, Viktor Borovskyi, Maksym Zayets

  45-53

  • PDF
• 

  Determining patterns in the separation of hemp seed hulls

  Viktor Sheichenko, Dmytro Petrachenko, Ivan Rogovskii, Igor Dudnikov, Vitaliy Shevchuk, Denys Sheichenko, Oleksiy Derkach, Ruslan Shatrov

  54-68

  • PDF
• 

  Identifying the influence of the pitch of hammers with cutting edges on the average length of feed crushed in hammer grinders

  Tokhtar Abilzhanuly, Ruslan Iskakov, Daniyar Abilzhanov, Alexandr Gulyarenko, Valery Khan

  69-78

  • PDF
• 

  Design of hydraulic motors with rotary shaft movement for driving working equipment in modern machines

  Nikolaj Remarchuk, Serhii Voronin, Yaroslav Chmuzh, Andrii Yevtushenko, Oleg Halytskyi

  79-86

  • PDF
• 

  Devising a calculation method for modern structures of current-conducting elements in large electric machines in a three-dimensional statement

  Oleksii Tretiak, Serhii Smyk, Stanislav Kravchenko, Serhii Smakhtin, Dmytro Brega, Anton Zhukov, Serhii Serhiienko, Yevhen Don

  87-96

  • PDF
• 

  Determining of the effect of reinforcing microrelief guides on the efficiency of folding integrated covers

  Petro Kyrychok, Dmytro Paliukh

  97-111

  • PDF
• 

  Devising a methodology for prototyping convex-concave parts using reverse-engineering technology providing the predefined geometric accuracy of their manufacturing

  Kateryna Maiorova, Oleksandra Kapinus, Viacheslav Nikichanov, Oleksandr Skyba, Artem Suslov

  112-120

  • PDF