The possibility of obtaining termografenit with magnetic properties from dispersed Fe-C metallurgical wastes
DOI:
https://doi.org/10.31498/2225-6733.34.2017.105434Keywords:
Fe-C containing wastes, graphite, intercalation, oxidation, termografenit, magnetic propertiesAbstract
It is known that it is possible to obtain compounds of graphite intercalation by oxidative treatment of graphite, getting termografenit from them. All known methods are associated with the graphite extraction from Fe-C containing wastes and its further oxidation. Intercalation compounds of graphite are formed as a result of the introduction of atomic and molecular layers of different chemical particles between the layers of graphite plates. Termografenit is very light dispersed graphite, having a unique complex of thermal and electrical properties. This is of interest to further study the technology of making this material. In previous studies, graphite was obtained from dispersed Fe-C containing wastes of metallurgy, and then was subjected to processing. However, considering the special microstructure and the morphology of the dispersed Fe-C containing wastes, they can become a raw material for production the intercalation compounds of graphite first, and then magnetic termografenit. In the present work dispersed Fe-C containing wastes of desulphurization at PJSC «Azovstal» with up to C 60% were used. The result of this investigation is receiving a new product – graphite intercalation compounds with magnetic properties – as well as the technology of getting the compounds. The technological peculiarities, providing for remaining significant amount of the iron oxides of Fe-C wastes in the material that in the process of oxidative intercalation give the intercalation compounds of graphite with magnetic properties, were found. Subsequent thermal expansion of the intercalation compounds of graphite at 1000°C makes it possible to obtain termografenit with a bulk density of 6-10 kg/m3, the specific magnetization saturation being 12-24 A·m2/kg and the specific electrical resistance being (1,9-9,0)·10-4 Ohms·mReferences
Список использованных источников (ГОСТ):
Уббеладе А.Р. Графит и его кристаллические соединения / А.Р. Уббеладе, Ф.А. Льюис. – М. : Мир, 1965. – 256 с.
Физико-химические свойства графита и его соединений / И.Г. Черныш и др.. – К. : Наукова думка, 1990. – 200 с.
Исследование процесса окисления дисперсных железографитовых отходов с целью получения соединений интеркалирования графита / В.А. Маслов, Ю.П. Пустовалов, Л.А. Трофимова. Л.А. Дан // Вісник Приазовського державного технічного університету : Зб. наук. пр. – Маріуполь : ДВНЗ «ПДТУ», 2016. – Вип. 32. – С.48-53.
Maslov V.A. Structural-morpfological and electrophysical characteristics of disperse iron-graphite metallurgical wastes / V.A. Maslov, L.A. Trofimova, L.A. Dan // Steel in translation. – 2009. – Vol. 39. – № 7. – Рp. 551-555.
Маслов В.А. Дисперсные железографитовые отходы металлургического производства как сырье для получения новых материалов / В.А. Маслов, Л.А. Трофимова, Л.А. Дан // Сталь. – 2009. – № 3. – С. 67-70.
Каненко Г.М. Состояние и перспективы утилизации железосодержащих отходов в металлургическом производстве Украины / Г.М. Каненко, В.А. Носков, В.Ф. Макогон // Металлургическая и горнорудная промышленность. – 2001. – № 4. – С. 98-100.
Гуров Н.И. Ресурсы графитосодержащих отходов и эффективность их использования / Н.И. Гуров, А.А. Федотов // Производительность труда и экономия материальных ресурсов в металлургии. – 1973. – Вып. 78. – С. 39-47.
Маслов В.О. Композіційні матеріали на основі залізографітових відходів металургійно-го виробництва / В.О. Маслов // Хімічна промисловість України. – 1994. – № 4. – С. 54-60.
References:
Ubbelade A.R. Grafit i ego kristallicheskie soedineniya [Graphite and its crystalline compounds]. Moscow, Mir Publ., 1965. 256 p. (Rus.)
Chernysh I.G., Karpov I.I., Prikhod'ko V.P., Shai V.M. Fiziko-himicheskie svojstva grafita i ego soedinenij [Physical and chemical properties of graphite and its compounds]. Kiev, Naukova dumka Publ., 1990. 200 p. (Rus.)
Maslov V.A., Pustovalov Yu.P., Trofimova L.A., Dan L.A. Issledovanie processa okisleniya dispersnyh zhelezografitovyh othodov s cel'yu polucheniya soedinenij interkalirovaniya grafita [The study of oxidation process of dispersed Fe-C containing waste to obtain intercolation compounds of graphite]. Vіsnik Priazovs'kogo derzhavnogo tekhnіchnogo unіversitetu. Seriia: Tekhnicheskie nauki – Reporter of the Priazovskyi State Technical Uni-versity. Section: Technical Science, 2016, no. 32, pp. 48-53. (Rus.)
Maslov V.A., Trofimova L.A., Dan L.A. Structural-morpfological and electrophysical characteristics of disperse iron-graphite metallurgical waste. Steel in translation, 2009, vol. 39, no. 7, рp. 551-555. (Eng.)
Maslov V.A., Trofimova L.A., Dan L.A. Dispersnye zhelezografitovye othody metallurgicheskogo proizvodstva kak syr'e dlya polucheniya novyh materialov [Disperse Fe-C containing wastes of metallurgy as raw material for new materials]. Stal' – Steel, 2009, no. 3, pp. 67-70. (Rus.)
Kanenko G.M., Noskov V.A., Makogon V.F. Sostoyanie i perspektivy utilizacii zhelezosoderzhashchih othodov v metallurgicheskom proizvodstve Ukrainy [Status and prospects of utilization of Fe-C containing wastes of metallurgy of Ukraine]. Metallurgicheskaia i gornorudnaia promyshlennost' – Metallurgical and Mining Industry, 2001, no. 4, pp. 98-100. (Rus.)
Gurov N.I., Fedotov A.A. Resursy grafitosoderzhashchih othodov i ehffektivnost' ih ispol'zovaniya [Graphite containing waste resources and their effective use]. Proizvoditel'nost' truda i ekonomiia material'nykh resursov v metallurgii – Productivity and saving material resources in metallurgy, 1973, no. 78, pp. 39-47. (Rus.)
Maslov V.O. Kompozіcіjnі materіali na osnovі zalіzografіtovih vіdhodіv metalurgіjnogo virobnictva [Composition materials on the basis of Fe-C containing wastes of metallurgy]. Khіmіchna promislovіst' Ukraїni – Chemical industry of Ukraine, 1994, no. 4, pp. 54-60. (Ukr.)
Downloads
How to Cite
Issue
Section
License
The journal «Reporter of the Priazovskyi State Technical University. Section: Technical sciences» is published under the CC BY license (Attribution License).
This license allows for the distribution, editing, modification, and use of the work as a basis for derivative works, even for commercial purposes, provided that proper attribution is given. It is the most flexible of all available licenses and is recommended for maximum dissemination and use of non-restricted materials.
Authors who publish in this journal agree to the following terms:
1. Authors retain the copyright of their work and grant the journal the right of first publication under the terms of the Creative Commons Attribution License (CC BY). This license allows others to freely distribute the published work, provided that proper attribution is given to the original authors and the first publication of the work in this journal is acknowledged.
2. Authors are allowed to enter into separate, additional agreements for non-exclusive distribution of the work in the same form as published in this journal (e.g., depositing it in an institutional repository or including it in a monograph), provided that a reference to the first publication in this journal is maintained.
