Determination and diagnosis of construction material quality control problems
DOI:
https://doi.org/10.31498/2225-6733.41.2020.226192Keywords:
quality control, functional diagnostics, systematic diagnostics, quality control assessment methods, construction materials, concrete structureAbstract
The presented article discusses the problems of quality control of construction materials. As we know, the quality of construction materials is one of the most pressing issues at the moment. Quality control means checking whether the quality indicators of goods meet the requirements of the adopted technical normative documents (standards, specifications, etc.). Quality control – set of quality indicators of the material is to check compliance with the requirements. This article also studies analysis of recent research and publications, the effectiveness of quality control methods and structure of functional diagnostics of quality control system. One of the most important areas of quality control is the diagnosis of control problems. Diagnostics – the identification and study of features that characterize the condition of building, structures of buildings and structures in order to identify possible deviations and prevent violations of the normal mode of operation. There are two main types of diagnostics, functional and systematic diagnostics. The main directions of functional diagnostic are described in tabular form. The structure of concrete is also considered here. Execution of concrete structures is a complex process that includes various activities. The basic principle of the development and the application of quality control system during the execution of concrete structures is the process approach. Defining the processes, identification and interaction of sub-processes are performed with the objective of quality monitoring and control that are required in order to achieve concrete structures’ specifications. Quality control system in the area of execution of concrete structures must also comply with national acts, rules, regulations and standards that are essential for concrete structures design, execution and concrete production. The analysis of specific compositions is presented in terms of diagnosing that structure
References
Драчев О.И. Статистические методы управления качеством / О.И. Драчев, А.A. Жилин. – Старый Оскол : ТНТ, 2011. – 148 с.
Кане М.М. Системы, методы и инструменты менеджмента качества / М.M. Кане, Б.В. Иванов, В.Н. Корешков. – СПб. : Питер, 2008. – 560 с.
Эсетова А.М. Стандарты качества как фактор повышения конкурентоспособности строительной продукции [Электронный ресурс] / А.М. Эсетова, И.Ш. Карибова // Проблемы современной экономики. – 2010. – № 1 (33). – Режим доступа: http://www.m-economy.ru/art.php?nArtId=2986 (дата обращения 03.02.2016).
Гумеров А.Ф. Управление качеством в машиностроении / А.Ф. Гумеров, А.Г. Схиртладзе, В.А. Гречишников. – Старый Оскол : ТНТ, 2011. – 168 с.
ГОСТ Р ИСО 9000-2015. Система Менеджмента Качества. Основные положения и словарь. – Введ. 2015-11-01. – М. : Стандартинформ, 2015. – 69 с.
Декач Д.И. Анализ производственно-хозяйственной деятельности подрядных строительных организаций / Д.И. Декач. – М. : Финансы и статистика, 1999. – 239 с.
Дорохова А.В. Основные проблемы управления качеством в строительстве / А.В. Дорохова // Студенческий научный форум: VI междунар. студ. электрон. науч. конф. (15 февраля-31 марта 2014 г.; Москва). – Режим доступа: www.scienceforum.ru/2014/article/2014001648.
Глазов М.М. Анализ и диагностика финансово-хозяйственной деятельности предприятия / М.М. Глазов. – СПб. : ООО «Андреевский издательский дом», 2006. – 448 с.
Чернышев А.Н. Формирование комплексной системы управления качеством строительной продукции : автореф. дис. … канд. экон. наук. : 08.00.05 / Чернышев Анатолий Николаевич. – Ростов-на-Дону, 2009. – 24 с.
Skalny J. Sulfate Attack on Concrete / J. Skalny, J. Marchand, I. Odler. – CRC Press, 2002. – 232 p.
Brandt A.M. Diagnosis of Concrete Quality by Structural Analysis / A.M. Brandt, D. Jozwi-ak-Niedzwiedzka // Advances in Civil Engineering Materials. – 2012. – Vol. 1 (1). – Pp. 1-21. – Mode of access: https://doi.org/10.1520/acem20120004.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Нурана Махяддин кизи Аллахвердиєва
This work is licensed under a Creative Commons Attribution 4.0 International License.
The journal «Reporter of the Priazovskyi State Technical University. Section: Technical sciences» is published under the CC BY license (Attribution License).
This license allows for the distribution, editing, modification, and use of the work as a basis for derivative works, even for commercial purposes, provided that proper attribution is given. It is the most flexible of all available licenses and is recommended for maximum dissemination and use of non-restricted materials.
Authors who publish in this journal agree to the following terms:
1. Authors retain the copyright of their work and grant the journal the right of first publication under the terms of the Creative Commons Attribution License (CC BY). This license allows others to freely distribute the published work, provided that proper attribution is given to the original authors and the first publication of the work in this journal is acknowledged.
2. Authors are allowed to enter into separate, additional agreements for non-exclusive distribution of the work in the same form as published in this journal (e.g., depositing it in an institutional repository or including it in a monograph), provided that a reference to the first publication in this journal is maintained.
