The charge distribution and redistribution along the circumference of top blast furnace top
DOI:
https://doi.org/10.31498/2225-6733.23.2011.22919Keywords:
distribution of charge on the throat, oriented circular uneven, offset hopper profile of the gristAbstract
The quantitative assessment of the impact of non-uniform and uneven loading on the consumption of the charge imbalance and shift the center of the charging in a blast furnaceReferences
Аввакумов, С.И. Оценка влияния неравномерного окружного распределения шихты на характер засыпи на колошнике доменной печи / С.И. Аввакумов, В.С. Дегтярев, Г.Д. Дегтярева и др. // Изв. вуз. Черная металлургия. - 1979. - №6. - С. 147-149.
Пугачев, А.В. Влияние положения воронки засыпи шихты на производительность доменной печи / А.В. Пугачев, Ю.Г. Воронов // Сталь. - 1966. - №10. - С. 883-884.
Большаков, В.И. Оценка положения центра воронки поверхности засыпи шихты относительно оси доменной печи / В.И. Большаков, И.Г. Муравьева, Ю.С. Семенов, С.Т. Шулико // Металлург. и горноруд. пром-сть. - 2006. - №2. - С. 106-111.
Брусов, А.Л. Влияние частоты вращения распределительного элемента на окружное распределение шихты / А.Л. Брусов, А.Ф. Рыбцов, А.А. Бачинин и р.. // Изв. вуз. Черная металлургия. – 1987. - №9. – С. 19-22.
Бугаев, К.М. Влияние распределения дутья по фурмам на газовый поток в доменной печи / К.М. Бугаев, В.М. Антонов, Г.В. Варшавский и др. // Сталь. - 1987. - №2. - С. 17-22.
Листопадов В.С. Исследование влияния распределения газового потока на ровность схода материалов по окружности доменной печи / В.С. Листопадов, К.А. Дмитренко, А.А. Параносенков, Н.М. Загоровская // Металлург. и горноруд. пром-сть. - 2008. - №6. - С.11-15.
Можаренко Н.М. Исследование влияния распределения газового потока по окружности на закономерности схода материалов в "сухой" области доменной печи / Н.М. Можаренко, А.А. Параносенков, Н.М. Загоровская // Металл и литье Украины. - 2008. - №3-4. - С. 5-7.
Downloads
How to Cite
Issue
Section
License
The journal «Reporter of the Priazovskyi State Technical University. Section: Technical sciences» is published under the CC BY license (Attribution License).
This license allows for the distribution, editing, modification, and use of the work as a basis for derivative works, even for commercial purposes, provided that proper attribution is given. It is the most flexible of all available licenses and is recommended for maximum dissemination and use of non-restricted materials.
Authors who publish in this journal agree to the following terms:
1. Authors retain the copyright of their work and grant the journal the right of first publication under the terms of the Creative Commons Attribution License (CC BY). This license allows others to freely distribute the published work, provided that proper attribution is given to the original authors and the first publication of the work in this journal is acknowledged.
2. Authors are allowed to enter into separate, additional agreements for non-exclusive distribution of the work in the same form as published in this journal (e.g., depositing it in an institutional repository or including it in a monograph), provided that a reference to the first publication in this journal is maintained.







