Mathematical aspects of choosing the capacity for determination saturation characteristic of measuring voltage transformers

Authors

  • Y. L. Sayenko ДВНЗ «Приазовський державний технічний університет», м. Маріуполь, Ukraine
  • A. S. Popov ДВНЗ «Приазовський державний технічний університет», м. Маріуполь, Ukraine

DOI:

https://doi.org/10.31498/2225-6733.23.2011.22922

Keywords:

saturation characteristic, voltage transformer, capacity, tolerance of measuring, saturation of steel

Abstract

Methods of determination of saturation characteristic of measuring voltage transformers were considered .A method of determination the capacity to define saturation characteristic was proposed. Evaluated was the tolerance of the proposed method

Author Biographies

Y. L. Sayenko, ДВНЗ «Приазовський державний технічний університет», м. Маріуполь

Доктор технічних наук, професор

A. S. Popov, ДВНЗ «Приазовський державний технічний університет», м. Маріуполь

Аспірант

References

Дружинин В.В. Магнитные свойства электротехнической стали / В.В. Дружинин. – М.: Энергия, 1974. – 237 с.

Преображенский А.А. Теория магнетизма, магнитные материалы и элементы / А.А. Преображенский. – М.: Высшая школа, 1972. – 288 с.

Молотилов Б.В. Холоднокатаные электротехнические стали / Б.В. Молотилов, Л.В. Миронов, А.Г. Петренко. – М.: Металлургия, 1989. – 168 с.

Писаревский Э.А. Электрические измерения и приборы / Э.А. Писаревский. – М.: Энергия, 1970. – 431 с.

Попов В.С. Электрические измерения / В.С. Попов. – М.: Энергия, 1974. – 390 с.

Дымков А.М. Трансформаторы напряжения / А.М Дымков, В.М. Кибель, Ю.В. Тишенин. – М.: Энергия, 1975. – 200 с.

Бессонов Л.А. Теоретические основы электротехники. Электрические цепи / Л.А. Бессонов. – М.: Гардарики, 2000. – 638 с.

Downloads

How to Cite

Sayenko, Y. L., & Popov, A. S. (2014). Mathematical aspects of choosing the capacity for determination saturation characteristic of measuring voltage transformers. Reporter of the Priazovskyi State Technical University. Section: Technical Sciences, (23), 253–258. https://doi.org/10.31498/2225-6733.23.2011.22922

Issue

No. 23 (2011): Reporter of the Priazovskyi State Technical University. Section: Technical sciences

Section

Electrical engineering and power engineering

License

The journal «Reporter of the Priazovskyi State Technical University. Section: Technical sciences» is published under the CC BY license (Attribution License).

This license allows for the distribution, editing, modification, and use of the work as a basis for derivative works, even for commercial purposes, provided that proper attribution is given. It is the most flexible of all available licenses and is recommended for maximum dissemination and use of non-restricted materials.

Authors who publish in this journal agree to the following terms:

1. Authors retain the copyright of their work and grant the journal the right of first publication under the terms of the Creative Commons Attribution License (CC BY). This license allows others to freely distribute the published work, provided that proper attribution is given to the original authors and the first publication of the work in this journal is acknowledged.

2. Authors are allowed to enter into separate, additional agreements for non-exclusive distribution of the work in the same form as published in this journal (e.g., depositing it in an institutional repository or including it in a monograph), provided that a reference to the first publication in this journal is maintained.