Optimization of materials consumption for ventilation systems air ducts outlay with dynamic programming in spreadsheets
DOI:
https://doi.org/10.31498/2225-6733.26.2013.30111Keywords:
exhaust system, air ducts, hydraulic network, optimization, dynamic programmingAbstract
Determining the duct diameters of minimum material outlay by solving the optimization problem with dynamic programming in spreadsheets is proposed. It is shown that existing methods of designing ventilation systems do not provide for minimal material outlay of ducts
References
Аэродинамический расчет воздушных сетей // Системы вентиляции и кондиционирования. Теория и практика / В.А. Ананьев [и др.]. 3-е изд. [М]: Евроклимат, 2000. Гл 6.3.4. C. 301-307.
Static regain method // ASHRAE Handbook: Fundamentals. SI Edition / ASHRAE. Atlanta: ASHRAE, 1997. - С. 32-19.
Селезнев В.Е. Применение методов динамического программирования для оптимизации режимов транспорта газов по газотранспортной сети // Методы и технологии численного моделирования газопроводных систем / В.Е. Селезнев, В.В. Алешин, Г.С. Клишин. – М: Едиториал УРСС, 2002. Гл 3.10.3. - С. 141-149.
Цаль Р.Я. Метод динамического программирования //Вычислительные машины в расчетах санитарно-технических систем / Р.Я. Цаль, Е.И. Чечик. Киев: Будівельник, 1968. С. 57-58.
Huei-Jiunn Chen. Process exhaust duct system design using dynamic programming methods / Huei-Jiunn Chen, Huan-Ruei Shiu, Sih-Li Chen // Journal of the Chinese Institute of Engineers. 2003. Т. 26, № 2. - С. 155-164.
Tsal R.J. T-method duct design: Part 1. Optimization theory and T-method duct design / R.J. Tsal, H.F. Behls, R. Mangel // ASHRAE Transactions. 1988. Т. 94, Ч. 2. - С. 90-150.
Mathews E.H. Problems with the T-Method /E.H. Mathews, D.T. Claassen // Building and Environment. 1998. Июль. Т. 33, вып. 4. - C. 173-179.
Расчет потребноrо давления для подачи воздуха в сети // Справочник по расчетам гидравлических и вентиляционных систем / под ред. А.С. Юрьева. С.-Пб: Мир и семья, 2001. Гл. 4.2.5. - C. 919-925.
Downloads
How to Cite
Issue
Section
License
The journal «Reporter of the Priazovskyi State Technical University. Section: Technical sciences» is published under the CC BY license (Attribution License).
This license allows for the distribution, editing, modification, and use of the work as a basis for derivative works, even for commercial purposes, provided that proper attribution is given. It is the most flexible of all available licenses and is recommended for maximum dissemination and use of non-restricted materials.
Authors who publish in this journal agree to the following terms:
1. Authors retain the copyright of their work and grant the journal the right of first publication under the terms of the Creative Commons Attribution License (CC BY). This license allows others to freely distribute the published work, provided that proper attribution is given to the original authors and the first publication of the work in this journal is acknowledged.
2. Authors are allowed to enter into separate, additional agreements for non-exclusive distribution of the work in the same form as published in this journal (e.g., depositing it in an institutional repository or including it in a monograph), provided that a reference to the first publication in this journal is maintained.