Analysis of ways to control the supply of the blast, and their impact on gas-dynamic processes in the blast furnace
DOI:
https://doi.org/10.31498/2225-6733.31.2015.72913Keywords:
hot blast, charge materials, gas flow, gas pressure, stabilization, blast furnace, top, blast furnace gasAbstract
The article presents the analysis of two methods of control over hot blast supply into a blast furnace with constant pressure and constant amount (consumption). The analysis of these two methods was performed with the aim of determining their influence upon changes in gas pressure in the blast furnace top. The blast furnace was considered as a unity of vessels (furnace hearth, the top) and gas-dynamic resistance (a column of charge materials). A differential equation was obtained, with regard to the dynamic balance of gas flow at the inlet and outlet of the top; the equation relates the pressure and gas consumption at the top to the pressure and hot blast consumption at the inlet and outlet of the furnace and to the resistance of the column of charge materials. The column of charge materials is considered as n-th number of channels through which gas flow inside the furnace moves and which resist to the flow. By the analysis of this equation at steady state (automatic stabilization of gas pressure in the top), the conditions were obtained to be satisfied with the specified value of gas pressure in the top. This value is equal to a half of the sum of the value of hot blast pressure at the inlet into the furnace and the value of pressure inside the collector of blast furnace gas. This conclusion is verified by the operation practice of blast furnaces in Ukraine. While analyzing the second method of controlling the supply of blast supply-stabilization of consumption (amount) of hot blast supplied into the furnace it has been shown that the method could be realized in condition of stabilization of the amount of blast furnace gas, going out of the furnace. As the resistance of the column of charge materials constantly changes it is necessary to change the hot blast pressure in order to ensure the constant amount of blast, supplied into the furnace. It is often connected with possible substantial pressure fluctuations of hot blast at the inlet of the furnace, which may result in stoppages in the motion of the column of charge materials. Due to it the hot blast pressure stabilization at the inlet of the furnace and the pressure stabilization in the top seem to be the most rational way to control the blast supplyReferences
Щедрин В.М. Теория доменной плавки под давлением / В.М. Щедрин. – М. : ГИНТЛ по черной и цветной металлургии, 1962. – Т. 1. – 279 с.
Тарасов В.П. Газодинамика доменного процесса / В.П. Тарасов. – М. : Металлургия, 1990. – 216 с.
Доменное производство : справочник / Под ред. И.П. Бардина. – М. : ГНТИ литера-туры по черной и цветной металлургии, 1963 – Т. 1. – 646 с.
Профос П. Регулирование паросиловых установок / П. Профос. – М. : Энергия, 1967. – 368 с.
Гмурман В.Е. Теория вероятностей и математическая статистика / В.Е. Гмурман. – М. : Высшая школа, 2003. – 479 с.
Downloads
How to Cite
Issue
Section
License
The journal «Reporter of the Priazovskyi State Technical University. Section: Technical sciences» is published under the CC BY license (Attribution License).
This license allows for the distribution, editing, modification, and use of the work as a basis for derivative works, even for commercial purposes, provided that proper attribution is given. It is the most flexible of all available licenses and is recommended for maximum dissemination and use of non-restricted materials.
Authors who publish in this journal agree to the following terms:
1. Authors retain the copyright of their work and grant the journal the right of first publication under the terms of the Creative Commons Attribution License (CC BY). This license allows others to freely distribute the published work, provided that proper attribution is given to the original authors and the first publication of the work in this journal is acknowledged.
2. Authors are allowed to enter into separate, additional agreements for non-exclusive distribution of the work in the same form as published in this journal (e.g., depositing it in an institutional repository or including it in a monograph), provided that a reference to the first publication in this journal is maintained.
