Vol. 1 No. 1 (127) (2024): Engineering technological systems

Published: 2024-02-29

Full Issue

Engineering technological systems

Determining conditions for providing maximum traction efficiency of tractor as part of a soil tillage unit

Anatoliy Lebedev, Mykhailo Shuliak, Sergei Lebedev, Stanislav Khalin, Tetiana Haidai, Anton Kholodov, Viacheslav Pirogov, Vitalii Shaposhnyk

6-14
- PDF
Development of plant integrity inspection on the API 5L X65 material under humid conditions: emerging fitness for service assessment approach

Sidhi Aribowo, Johny Soedarsono, Christy Sicilia, Rini Riastuti, Agus Kaban

15-22
- PDF
Devising a procedure for integrated modeling of riverbed shape in the area of bridge crossing in order to avoid dangerous washing erosion

Artur Onyshchenko, Вorys Ostroverkh, Liudmyla Potapenko, Vitalii Kovalchuk, Oleksandr Zdolnyk, Andriy Pentsak

23-32
- PDF
Effect of variations in concrete quality on the crack width in rigid pavement

Wisnumurti, Agoes Soehardjono, Roland Martin Simatupang

33-40
- PDF
Determining the rational structure of multilayer technical fabric for woven power clamps

Volodymyr Shcherban, Gennadij Melnyk, Marijna Kolysko, Anton Kirichenko, Yury Shcherban, Serhii Lukianenko, Ihor Ostashevskyi, Pavlo Vdovin

41-53
- PDF
Identification of the impact of electric pulse action on the disintegration of a natural mineral

Ayanbergen Khassenov, Gulden Bulkairova, Dana Karabekova, Madina Bolatbekova, Gulnur Alpyssova, Arystan Kudussov, Perizat Kissabekova

54-59
- PDF
Implementing surface treatment and adhesive variations for bonded joints between composite gfrp and aluminum at 200 °C

Herry Purnomo, Muhammad Johan Rifa’i, Purwoko, David Natanael Vicarneltor, Mahfud Ibadi, Muhamad Hananuputra Setianto, Maulana Yudanto, Ara Gradiniar Rizkyta

60-66
- PDF
Development of programmed trajectories based on the mobility degrees of manipulation robot with a spherical coordinate system for removing oxide film in the production of commercial magnesium

Akambay Beisembayev, Anargul Yerbossynova, Petro Pavlenko, Mukhit Baibatshayev

67-88
- PDF
Welding room development for simultaneous improvement of welder health and weld quality of gas metals arc welded aluminum AA5083-H112

Triyono, Anton Harseno, Nurul Muhayat

89-98
- PDF